info@bnzindia.com
Backlighting Smart
Backlighting Smart
-M22GX42D (CC)
-M22GX42D (CC)
Features
– 12VDC
– 72 lm/module
– 100 lm/W
– Beam angle 160°
– CE marked and UL listed
Certifications
Newly Launched
-M22GX42D (CC)
Specifications:
- Lightweight
- Light Distribution 160º
- Ease of use
GALLERY
BNZ INDIA
Backlighting Smart
Electrical Data
| Product Description | Typical Voltage | Energy Consumption (W/module) | Energy Consumption (W/chain) | Energy Consumption (W/ft.) | Power | Supper Loading | Additional Information (modules/chain) |
|---|---|---|---|---|---|---|---|
|
Product Description M22GW42D |
Typical Voltage 12VDC |
Energy Consumption (W/module) 0.72 |
Energy Consumption (W/chain) 43.2 |
Energy Consumption (W/ft.) 1.5 |
Power 83 modules/60W
|
Supper Loading 41 ft./60W |
Additional Information (modules/chain) 60 |
Photometrical Data
| Product Description | Light color (designation) | Color (CCT, wavelength) | Color Rendering Index | Typical Brightness (lumen/module) | Typical Brightness (lumen/chain) | Typical Brightness (lumen/ft.) |
|---|---|---|---|---|---|---|
|
Product Description M22GW42D |
Light color (designation) Cool White |
Color (CCT, wavelength) 5500K -17000K |
Color Rendering Index Ra > 70 |
Typical Brightness (lumen/module) 72 |
Typical Brightness (lumen/chain) 4320 |
Typical Brightness (lumen/ft.) 146 |
|
Product Description M22GW42D |
Light color (designation) Warm White |
Color (CCT, wavelength) 3000K -
4000K |
Color Rendering Index Ra > 70 |
Typical Brightness (lumen/module) 68 |
Typical Brightness (lumen/chain) 4080 |
Typical Brightness (lumen/ft.) 138 |
Light Distribution
0
º
Environmental and Application Conditions
| Conditions | Values |
|---|---|
|
Operating Environment (ta) |
-25°C to +55°C |
|
Storage Temperature Range (ts) |
-40°C to +85°C |
|
Max. operating (case) temperature ( tc
) |
75°C |
|
IP Rating |
IP66 |
|
Lifetime (L70B50) |
50,000 hours |
|
Dimming mode |
Dimmable |
|
Cutting Resolution |
Cut on wire between every module |
Additional product information
- Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms.
- Installation by qualified electrician only.
- Parallel connection is mandatory for safe electrical operation. Serial connection of LED modules is discouraged.
- Unbalanced voltage drop in serial connection can cause hazardous overload.
- Electrical contact is achieved with the contact cables or the terminals of the module. Please refer to the technical data for maximum number of LED modules that can be operated on one control gear.
- To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is recommended to avoid heavy vibration.
- LED modules are dimmable by means of PWM (pulse width modulation).